Tips & Techniques
1). Pressing a bow with the cross axis quiver on the bow.
In most instances you can keep the hood on, but if clearance is tight, remove the hood only, loosening the 2 button head screws that attatch the hood to the riser bracket, be sure to mark or measure the spot before you remove the hood so you can quickly replace the hood in the same location. this will be the only part that should need clearance from the press.
2). Arrow gripper is warn and needs to be replaced.
In most all cases the gripper will have more mileage on the front arrow holder, you can remove the string dampener rod end, then slide off the full-floating rubber gripper flip it 180 and replace the string dampener rod end, in the mean while you can purchase a replacement part when you get a free minute.
